Brand new never used
Was £449
Just £199 Christmas special
kickstart motorcycles 61 Euston Street Belfast bt69af tel 90 739222 mobile 07850365426 kickstart motorcycles for all your biking needs - helmets-jackets-gloves-trousers-waterproofs-parts-accessories-servicing-finance everything all under the one roof

Three years ago, Arai began to develop this new model and it is with great pride that we now introduce the Renegade-V. A helmet developed from the desire for a full-face helmet that would match cruiser motorcycles, complementing the riders’ unique style. The lines of the chin area were sculpted to convey a strong and unique look, and you can imagine the chiselled face of a rugby player or a martial arts master in top form. The four front intake slots, combined with the four side exhaust slots create a highly effective internal air flow, providing excellent ventilation, making it very comfortable. The key to this high performance are the side ducts that remove hot air from the inside, which are connected directly to the interior via high performance air channels. These are hidden behind the cheek pads, connect the two side exhaust slots to the interior and pull air out of the helmet with incredible efficiency. We believe the Renegade-V is a helmet that will make you look tough, a style surely to be accepted and appreciated by cruiser and retro/heritage riders alike. And of course, as with all Arai models, the Renegade-V first exceeds Arai’s strict internal requirements before being certified to the mandatory ECE standard.

Ventilation

Free Flow System (FFS)
Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air.

Front Ventilation:

Dual intake
Designed for increased airflow and lower noise level, guiding fresh, cool air into the interior.

Three position chin vent
Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider.

Rear Ventilation:

Neck exhaust vent
To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.

One-piece rear exhaust
Extracts more hot air from the helmets interior and improves aerodynamics.

Side exhausts
Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.

Shell Construction SFL

Special Fibre Laminate Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area – the shell’s main job – through strength, structural integrity and impact flexibility.

Visor: VAS Max Vision Visor with De-Mist option
VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed.

Visor: Pinlock insert lens included
Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily.

Interior

Antimicrobial Liner
New exclusive liner with antimicrobial stays fresher between cleanings.

Replaceable Cheek pads/Ear cups
Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Replaceable Interior
Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Speaker pockets
Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included).

Facial Contour System (FCS)
To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

5mm ’’Peel Away’’ Ear cups/Cheek pads
Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed.

Comfort : Chin Curtain
Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.

Approval: ECE 22-05
The most common helmet certification internationally, required by over 50 countries worldwide.

Arai General Features

Five times inspected
Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.

Washable interior
The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water.

Handmade
It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.

All-day comfort
All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.

Penetration tested
All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.

Double-D ring device
The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.

Smooth shape, better protection
The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact.

Hard outer shell, soft inner shell
Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.

Organic shape
The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence.

5-year limited warranty
All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.

Different outer shells
Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.

Arai In-house test
This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.
Source:See Orginal Advert on our JustMotorAds Motorbike Group